sysdat.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
2-1
System Data
Overview
2 System Data
2.1 Overview
Chapter contents
This chapter discusses the topics listed in the following table.
Topic
HiPath 3000, page 2-3
● Introduction, page 2-3 (electrical environment, systems)
● Design and Dimensions of the HiPath 3000 Systems, page 2-4:
– Design and Dimensions of HiPath 3800
– Design and Dimensions of HiPath 3750
– Design and Dimensions of HiPath 3550
– Design and Dimensions of HiPath 3350
– Design and Dimensions of HiPath 3700
– Design and Dimensions of HiPath 3500
– Design and Dimensions of HiPath 3300
● System Environment of the HiPath 3000 Systems, page 2-13:
– HiPath 3800 System Environment
– HiPath 3750 and HiPath 3700 System Environment
– HiPath 3550 System Environment
– HiPath 3350 System Environment
– HiPath 3500 System Environment
– HiPath 3300 System Environment
HiPath 5000, page 2-19
System-Specific Capacity Limits for HiPath 3000, HiPath 5000, page 2-22
Static Configuration Rules, page 2-24
Dynamic Configuration Rules, page 2-26
● Gateway Channels (DSP Channels), page 2-26
● MOH Channels (G.711, G.723, G.729), page 2-28
● IP Networking Channels (PBX Networking Channels), page 2-28
● Bandwidth Control for IP Networking Channels (PBX Networking Channels), page 2-29
● DMC (Direct Media Connection) Channels, page 2-29
● ISDN Routing/PPP Channels, page 2-29
● Fax / Modem Channels, page 2-30
● Determining the Number of HG 1500 Boards Required, page 2-31
To Next Page
Loading...
Need help?
General