Siemens Hipath 5000 - Licensing Opticlient Attendant; Figure 8-3 Procedure for Licensing Opticlient Attendant V7.0 on Hipath; Opticlient Attendant V7.0 Connected to Hipath 3000 V6.0

Licensing
P31003-H3560-S403-54-7620, 09/05
8-26 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
licensing.fm
Licensing optiClient Attendant
8.5 Licensing optiClient Attendant
In optiClient Attendant V7.0 or later, licensing is performed via HiPath License Management. In
the case of versions < 7.0, licensing is performed on the optiClient Attendant as before.
optiClient Attendant V7.0 licensing is performed both for new installations and upgrades.
If you order an upgrade, a valid optiClient Attendant V6.0 CD key is a strict licensing require-
ment.
Upgrades are not available for versions previous to optiClient Attendant V6.0.
8.5.1 optiClient Attendant V7.0 Connected to HiPath 3000 V6.0
Licensing is performed on the associated HiPath 3000 system. In order to ensure unique licens-
ing, the license file is linked with the MAC address of the HiPath 3000 control board.
Procedure
Figure 8-3 Procedure for Licensing optiClient Attendant V7.0 on HiPath 3000 V6.0
Step Activity (Remarks)
1. Read the customer data record of the HiPath 3000 V6.0.
2. Read out the MAC address of the HiPath 3000 control board.
optiClient
Attendant 1
HiPath 3000
V6.0
HiPath 3000
Manager E
(CLS)
CLC
CLM
optiClient
Attendant 6
V.24,
USB or
TCP/IP
CLA
6
1
5
2
3
4