inst_h3.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
4-1
Installing HiPath 3000
Overview
4 Installing HiPath 3000
4.1 Overview
Chapter contents
This chapter discusses the topics listed in the following table.
Topic
Installing HiPath 3800, page 4-3
● Installation Prerequisites, page 4-3
● Installation Procedure, page 4-4
● Installing HiPath 3800 (Standalone), page 4-5
● Installing HiPath 3800 (19-Inch Cabinet), page 4-21
● Installing Boards (Configuration Notes), page 4-31
● Connecting the Cable to the Backplane, page 4-51
● Using an External Main Distribution Frame or External Patch Panel, page 4-66
● Loading the System Software and Installing Subboards on the CBSAP, page 4-81
● Connecting Workpoint Clients, page 4-82
● Making Trunk and Networking Connections, page 4-82
● Performing a Visual Inspection, page 4-83
Installing HiPath 3750, HiPath 3700, page 4-85
● Installation Prerequisites, page 4-85
● Installation Procedure, page 4-86
● Installing HiPath 3750, page 4-88
● Installing HiPath 3700 (19-Inch Cabinet), page 4-129
● Loading the System Software and Installing Subboards on the CBCPR, page 4-153
● Configuration notes, page 4-154
● Connecting Workpoint Clients, page 4-163
● Making trunk connections, page 4-163
● Performing a Visual Inspection, page 4-164
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300, page 4-165
● Installation Prerequisites, page 4-165
● Installation Procedure, page 4-166
To Next Page
Loading...
