Siemens Hipath 5000 Service Manual

Workpoint Clients
P31003-H3560-S403-54-7620, 09/05
10-62 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
wclient.fm
optiPoint 410 / optipoint 410 S and optiPoint 420 / optiPoint 420 S
Double assignment can be performed for the keys if only call numbers without LED support are
saved on the first level. It is also possible to program call numbers without LED support on the
second level. These can be internal station numbers, DID call numbers and call numbers from
a HiPath network.
The bottom key of the first key module installed on the telephone (optiPoint self labeling key
module or optiPoint key module) is automatically defined as “Shift key” (default). This is the
case if no Shift key was already programmed.
10.3.5.2 optiPoint 410 display module
This is an add-on device with a graphic swivel display (240 x 320 pixels) with touchscreen func-
tionality, background illumination, and navigation keys.
Main features
● Graphical user interface
● Local personal telephone directory
● Access to company-wide telephone directory via LDAP
● WAP browser
● Voice-controlled dialing
● Call list containing all incoming and outgoing calls
● Speed-dialing list
Figure 10-29 optiPoint 410 Display Module

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English