Siemens Hipath 5000 - Checking the Installation of the Hipath Comscendo Service

HiPath 5000 Startup and Administration
P31003-H3560-S403-54-7620, 09/05
6-30 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
start_h5.fm
HiPath 5000
6.6.4.1 Checking the Installation of the HiPath ComScendo Service
Procedure
1. Open the status display with Start/Program Files/HiPath/HiPath 5000 State
Viewer.
2. The following appears:
Make sure that the server status is "Running" and that all service status indicators are
green.
Details about configuring the HiPath ComScendo service can be found in Section 6.10.1.
>
Section 12.3.1.10 contains information about how to proceed in the event of a
fault, in other words if one or more service status indicators are red.