Siemens Hipath 5000 - Figure 10-18 Optipoint 410 Entry, Optipoint 410 Entry S - Standard Key

wclient.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
10-41
Workpoint Clients
optiPoint 410 / optipoint 410 S and optiPoint 420 / optiPoint 420 S
Standard key assignment (default) for optiPoint 410 entry, optiPoint 410 entry S
Refer to Section 10.3.4 for information on connection and startup.
Figure 10-18 optiPoint 410 entry, optiPoint 410 entry S - Standard Key Assignment (Default)
optiPoint 410 entry
Consultation hold
Number redial
Message
Callback
Speed dialing
Microphone on/off
Loudspeaker
Disconnect
optiPoint 410 entry S
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Cancel
Level