Siemens Hipath 5000 - Figure 3-172 V241 (Not for U.S.) (S30807-Q6916-X100); Figure 3-173 Hipath 3550 and Hipath 3350 - V.24 Connections; V241 (Not for U.S.)

Boards for HiPath 3000
P31003-H3560-S403-54-7620, 09/05
3-384 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
boards.fm
Options
3.4.17 V24/1 (not for U.S.)
Introduction
You can use the V24/1 board in HiPath 3550 and HiPath 3350. This provides a serial V.24 in-
terface for connecting PCs, printers or applications.
Interfaces
Figure 3-172 V24/1 (Not for U.S.) (S30807-Q6916-X100)
Figure 3-173 HiPath 3550 and HiPath 3350 - V.24 Connections
1
26
25-pin Sub-D jack
To CBCC/CBCP (X7) via ribbon cable
X2
Component side
shown