Installing HiPath 3000
P31003-H3560-S403-54-7620, 09/05
4-86 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
inst_h3.fm
Installing HiPath 3750, HiPath 3700
4.3.2 Installation Procedure
Table 4-10 HiPath 3750, HiPath 3700 - System Installation Procedure
Step Installation Activity
Installing HiPath 3750 Installing HiPath 3700 (19-Inch Cabi-
net)
1. Selecting the Installation Site, page 4-89
(usually predetermined)
Selecting the Installation Site, page 4-130
(generally determined by the existing 19-
inch cabinet)
2. Unpacking the Components, page 4-91 Unpacking the Components, page 4-130
3. Install MDFU or MDFU-E (not for USA),
page 4-92
Mounting the System Cabinet in the 19-
Inch Cabinet, page 4-131
4. Setting up the System Cabinets (from
Page 4-93):
Single Cabinet
Two cabinets (stacked)
Two cabinets (side by side)
Three cabinets (stacked)
Mounting the Patch Panel in the 19-Inch
Cabinet, page 4-135
5. Grounding the System, page 4-108
Checking the Grounding, page 4-113
Grounding the System, page 4-136
Checking the Grounding, page 4-138
6. Connecting the Cable to the Backplane,
page 4-114
Connecting the Cable to the Backplane,
page 4-139
7. Laying the Line Network and Setting
Jumpers on the MDFU or MDFU-E, page
4-124
Connecting the Line Network to the Patch
Panel, page 4-152
8. Loading the System Software and Installing Subboards on the CBCPR, page 4-153
9. Configuration notes, page 4-154 (cabinet(s) are already equipped with the boards)
10. Connecting Workpoint Clients, page 4-163
To Next Page
Loading...
Need help?
General