Siemens Hipath 5000 - Table 6-8 Getaccount - Data Record Structure

start_h5.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
6-59
HiPath 5000 Startup and Administration
GetAccount
Data record structure
Table 6-8 GetAccount - Data Record Structure
No. Pos. Lengt
h
Description
1 1 - 8 8 Date of call end
Format DD.MM.YY, for example "13.09.00"
2 9 - 16 8 Time of call end
Format hh:mm:ss, for example "14:14:00"
3 17 - 19 3 Trunk number
right-aligned with leading blanks, for example " 1"
4 20 - 22 3 Node ID for HiPath 3000 (matches the configuration in HiPath 3000
Manager E)
right-aligned with leading blanks
5 23 - 28 6 Internal extension number
right-aligned with leading blanks
6 29 - 33 5 Call duration in seconds
7 34 - 41 8 Call duration
Format hh:mm:ss, for example "00:04:34
8 42 - 66 25 ● For incoming calls: external caller number
● For outgoing calls: external call number dialed including the call-
by-call number
left-aligned with succeeding blanks
9 67 - 77 11 Number of tariff units
right-aligned with leading blanks
10 78 1 Call type
● 1: incoming
● 2: outgoing (default)
11 79 - 89 11 Account code ACCT
left-aligned with succeeding blanks
12 90 - 100 11 MSN used
13 101 -
105
5 Trunk
right-aligned with leading blanks
14 106 -
109
4 LCR Selected Route (corresponds to configuration in HiPath 3000
Manager E)
right-aligned with leading blanks
15 110 1 CR