Siemens Hipath 5000 - Calling Multiple Parties Simultaneously; Calling a Second Party (Consultation Hold)

System Data
P31003-H3560-S403-54-7620, 09/05
2-6 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
sysdat.fm
HiPath 3000
2.2.2.2 Design and Dimensions of HiPath 3750
Three configurations
Depending on the requirements, HiPath 3750 can be used as:
● a single-cabinet system (BC)
● a two-cabinet system (BC + EC1)
● A three-cabinet system (BC + EC1 + EC2)
Design
The HiPath 3750 uses “8-slot” cabinets, where expansion cabinet 1 (EC1) and expansion cab-
inet 2 (EC2) are identical in design.
The BC has seven slots available for peripheral boards and each expansion cabinet has eight
slots. The UPSM power supply (in all cabinets) and the CPCPR central control board (only in
the BC) have fixed positions.
Up to two cabinets can be stacked.
A main distribution frame unit is needed to complete the communication system.