Siemens Hipath 5000 Service Manual

IP Protocols and Port Numbers Used with HiPath 3000/5000 V6.0
P31003-H3560-S403-54-7620, 09/05
C-14 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
portnos.fm
optiPoint 400, optiPoint 410, optiPoint 410 S, optiPoint 420, optiPoint 420 S, optiPoint 600 office
HTTPS Secure Hypertext Transport
Protocol
443
SNMP 161 Not configurable
SNMP Traps 162 Not configurable
SNTP 123 Not configurable
SNTP Heartbeat 580 Not configurable
DNS 53
DHCP Server Port 67 Default BOOTP port numbers. Not
configurable
DHCP Client Port 68 Default BOOTP port numbers. Not
configurable
FTP 21
Telnet 23 23
TFTP 69 Not configurable
LDAP 389 389
WAP 2948 2948 WAP Push. Not configurable
9200 9200 WAP Connectionless Session Service
Service Agent Request Port 5100 SA base port
The default value is = 5100
Auto Discovery 5100 SA base port + 0
CTI Service 5105 5105 SA base port + 5
Debug Port 5110 5110 SA base port + 10
Terminal Emulator Port 5115 5115 SA base port + 15
Signaling Emulator Port 5120 5120 SA base port + 20
Probe Service 5125 5125 SA base port + 25
Config Service 5130 5130 SA base port + 30
Resource Sharing 5135 5135 SA base port + 35
HFA CTI Service 5140 5140 SA base port + 40
QDC Server 12010 12010
DLS 443 443
SIP Server 5060
Table C-7 optiPoint 400, optiPoint 410, optiPoint 410 S, optiPoint 420, optiPoint 420 S,
optiPoint 600 office - Used IP Protocols and Port Numbers
Function Default port Note
UDP TCP

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English