Boards for HiPath 3000
P31003-H3560-S403-54-7620, 09/05
3-134 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
boards.fm
Peripheral Boards
Assignment of the RJ45 jack X3
The Ethernet (10/100BaseT) interface is accessed via the 8-pin RJ45 jack X3. The signals are
output simultaneously at the printed circuit connector X2.
Table 3-53 IVMS8 and IVMS8R - Assignment of the RJ45 Jack X3 (LAN Connector)
RJ45 Jack X3
Pin
Signal Description Printed Circuit Con-
nector X2
Pin
1Tx+Transmit+ 1
2Tx–Transmit– 3
3 Rx + Receive + 7
4–Not used
5–Not used
6 Rx – Receive – 9
7–Not used
8–Not used
To Next Page
Loading...
