HiPath 5000 Startup and Administration
P31003-H3560-S403-54-7620, 09/05
6-18 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
start_h5.fm
HiPath 5000
7. The Select Features dialog appears.
Mark the components you want to install and unmark the ones you don’t.
>
The components marked by default (Default Setup) are standard components
that as a rule should always be installed. For information on the exact compo-
nents to install, refer to your order.
The subsequent description of the installation procedure relates to the default
setup.
Information on installing the HiPath ComScendo Service can be found in
Section 6.6.4.
To Next Page
Loading...
