licensing.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
8-11
Licensing
Licensing for HiPath 3000 V6.0, HiPath 5000 V6.0
4. Save CDB and transfer to HiPath 3000. Save CDB and transfer to HiPath 5000
RSM. The server transfers the CDB files
to the networked systems autonomously.
The HG 1500 boards are then registered
automatically.
Note: Unlike previous versions, this ver-
sion does not require a reset of the
HG 1500 boards. A reset should therefore
not be carried out. as it may disrupt data
transfer.
>
Note on licensing the Feature Server
The Feature Server can be started without a license. In this case a message indicat-
ing that licensing needs to be performed is displayed.
Given that the Feature Server receives its license from the CDB of the first node, the
licensing dialog for this node must be opened first and, as a minimum requirement,
licensing must be performed using a .gcpf file. The first node must then be added to
the HiPath 3000/5000 network. The Feature Server now has its (grace period) li-
cense.
If the Feature Server is not licensed through the first node within one hour, the server
automatically stops operating after an hour has elapsed. When the server is restart-
ed there is a new one-hour period in which to perform licensing.
Preconfiguration can be performed in preparation for installation of a HiPath 3000/
5000 network for a customer. Licensing is required for the network at the preconfig-
uration stage. If there is no valid license file available, licensing can also be per-
formed using a GPCF file.
Step Activity (Remarks)
Standalone or networked HiPath 3000
systems without HiPath 5000 RSM
Networked HiPath 3000 systems with
HiPath 5000 RSM
To Next Page
Loading...
Need help?
General