Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 125
Chapter 3
TimeProvider 5000 CLI Command Set
show exp-if status
Use this command to display the status of DTI and Ethernet expansion ports on IMC
card, IO card (DTI only), and expansion shelves.
Command Syntax:
show exp-if status {imc | io | exp[0-9]}
Example 1:
To display the status of DTI and Ethernet on the IMC expansion port
tp5000> show exp-if status imc
Response 1a:
IMC-EXP DTI status : up
IMC-EXP ETH status : up
Response 1b:
IMC-EXP DTI status : down
IMC-EXP ETH status : down
Example 2:
To display the status of expansion ports on the IO card
tp5000> show exp-if status io
Response 2a:
io-exp-1: up
io-exp-2: disabled
Response 2b:
io-exp-1: down
io-exp-2: up
Example 3:
To display the status of DTI and Ethernet on expansion shelf ID=3 expansion port
tp5000> show exp-if status exp3
Response 3a:

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English