Symmetricom TimeProvider 5000 User Manual

128 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
set exp-if eth
Use this command to enable or disable the Ethernet port on the IMC that is used to
connect to an expansion shelf. This command is typically used to disable the
Ethernet port when there are no expansion shelves being used with the TP5000.
Command Syntax:
set exp-if eth imc-exp state {enable | disable}
Example:
To disable the Ethernet port on the exp-if interface on the IMC -
tp5000> set exp-if eth imc-exp state enable
Level : Config, and Admin

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English