154 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
----------------------------------------------------------
|Mod |HW Compatibility|SW Compatibility|IMC-Exp Compati.|
|----|----------------|----------------|----------------|
| imc| 0x00000000 | 0x00000000 | 0x00000001
||....|................|................|................|
| exp0| 0x00000000 | 0x00000000 | 0x00000001 |
|....|................|................|................|
. . . .
| exp8| 0x00000000 | 0x00000000 | 0x00000001 |
|.....|...............|................|................|
| exp9| 0x00000000 | 0x00000000 | 0x00000001 |
---------------------------------------------------------
Remarks: Only the asset number can be modified.
Level : User, Config, and Admin
set inventory
Use this command to provision the system's user-assigned asset value information.
Command Syntax:
set inventory asset <asset-value>
Range: Enter user-assigned asset value from 1 to 20 characters.
Example:
To set the inventory asset to a value of “tcb121”
tp5000> set inventory asset tcb121
Level : Config and Admin only