Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 155
Chapter 3
TimeProvider 5000 CLI Command Set
set io
This command provisions the system's I/O module port configuration.
Command Syntax:
set io port[1|2] {input | output}
Example 1:
To set Port 1 of the I/O module as an Input 
tp5000> set io port1 input
Example 2:
To set Port 2 of the I/O module as an Output 
tp5000> set io port2 output
Related : show io-status,
Level : Config, and Admin

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English