Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 163
Chapter 3
TimeProvider 5000 CLI Command Set
set ip-mode
Use this command to set the DHCP mode for the IMC Ethernet interface. You can
set up the interface to use either DHCP or a static IP.
Command Syntax:
set ip-mode imc {dhcp|static}
Example:
tp5000> set ip-mode imc dhcp
Remarks: Use set ip to restart the interface after configuring the system.
Level : Config and Admin only

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English