Symmetricom TimeProvider 5000 User Manual

164 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
show led
This command displays the LED status for each of the modules. See Table 3-2 for
LED descriptions for the main shelf. See Table 3-3 for LED descriptions for the
expansion shelves.
Command Syntax:
show led {main | exp[0-9]}
Example 1:
tp5000> show led main
Response 1:
-------------------------------------------
|Index|Module ID|LED |LED Status |
|-----|---------|------------|------------|
|1 |imc |bta |off |
|.....|.........|............|............|
|2 |imc |btb |off |
|.....|.........|............|............|
|3 |imc |sys |red |
|.....|.........|............|............|
|4 |imc |alm |off |
|.....|.........|............|............|
|5 |imc |gps |green |
|.....|.........|............|............|
|6 |imc |mgmt |green |
|.....|.........|............|............|
|7 |ioc1 |active |green |
|.....|.........|............|............|
|8 |ioc1 |alarm |amber |
|.....|.........|............|............|
|9 |ioc1 |eth1 |off |
|.....|.........|............|............|
|10 |ioc1 |eth2 |green |
|.....|.........|............|............|
|11 |ioc1 |holdover |off |
|.....|.........|............|............|
|12 |ioc2 |active |off |
|.....|.........|............|............|
|13 |ioc2 |alarm |red |
|.....|.........|............|............|
|14 |ioc2 |eth1 |green |
|.....|.........|............|............|
|15 |ioc2 |eth2 |off |
|.....|.........|............|............|
|16 |ioc2 |holdover |off |
-------------------------------------------
Example 2:
To display the LED status for expansion shelf 4 (id=exp3) 

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English