Symmetricom TimeProvider 5000 User Manual

196 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
password
Use this command to modify the password of the current user.
Command Syntax:
password
Example:
tp5000> password
Response:
Prompt for password
Prompt for password confirmation
Level : User, Config, and Admin
Note: Be sure to not lose or forget the password. Contact
Symmetricom support for the password recovery procedure if
all admin-level user passwords are lost.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English