Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 197
Chapter 3
TimeProvider 5000 CLI Command Set
ping
Use this command to ping the host specified by the address (xxx.xxx.xxx.xxx) and
display ping statistics.
Command Syntax:
ping {imc|ioc-1|ioc-2|exp[0-9} port{1-16]} [<vlan-id>]
<ip-address>
Example 1:
For IMC address of 192.168.5.100 
tp5000> ping imc 192.168.5.100 <enter>
Response 1:
Ping imc success
Example 2:
For port 1 on the active IOC card, IP address 192.168.5.110, with VLAN ID of 23 
tp5000> ping ioc-1 23 192.168.5.110
Response 2:
Ping ioc-1 success
Example 3:
For port 2 on the active IOC card, IP address 192.168.5.112, with no VLAN 
tp5000> ping ioc-2 192.168.5.112
Response 3:
Error: Action failed.
Ping ioc-2 failed
Note: To minimize system resource usage and deter denial of
service attacks, the system is configured to allow a maximum
ICMP ping request rate of 1 per second.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English