Symmetricom TimeProvider 5000 User Manual

212 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
To set the PTP Diffserv Code Point value for port 2 to a value of 21:
tp5000> set ptp dscp ioc1-2 21
Example 16
 Common Attributes:
To Enable the PTP Diffserv Code Point for port 1:
tp5000> set ptp dscp-state ioc1-1 enable
Example 17
 Common Attributes:
To Enable dither for port 1:
tp5000> set ptp dither ioc1-1 enable
Example 18
 Common Attributes:
To set the PTP master Clock ID for Port 1 to a value of AA:BB:11:22:33:44:55:66
tp5000> set ptp clockid ioc1-1 aa:bb:11:22:33:44:55:66
Example 19
 Multicast Attributes:
To set the PTP Multicast client timeout to 900 seconds for Port 1:
set ptp multicast client-timeout ioc1-1 900
Example 20
 Multicast Attributes:
To provision the PTP Multicast announce timeout to 5 for Port 1:
set ptp multicast announce-timeout ioc1-1 5
Example 21
 Multicast Attributes:
To provision the PTP Multicast VLAN ID to 12 for Port 1:
set ptp multicast vlanid ioc1-1 12
Example 22
 Multicast Attributes:
To provision the interval between announce messages to -6 (0.015625 seconds) for
PTP Multicast on Port 2:
set ptp multicast announce-int ioc1-2 -6
Example 23
 Multicast Attributes:
To provision the interval between synchronization messages to -5 (0.03125
seconds) for PTP Multicast on Port 2:

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English