098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 211
Chapter 3
TimeProvider 5000 CLI Command Set
tp5000> set ptp state ioc1-1 enable
Example 7
Common Attributes:
To set the IP Header Time to Live (TTL) for IOC1 to a value of 6:
tp5000> set ptp ttl ioc1-1 6
Example 8
Common Attributes:
To set the maximum number of clients to “100” for port 1 of IOC1:
tp5000> set ptp max-client ioc1-1 100
Example 9
Common Attributes:
To set the PTP announce limit to no less than 0.5 seconds (2
-1
) for port 1:
tp5000> set ptp announce-limit ioc1-1 -1
Example 10
Common Attributes:
To set the PTP sync limit to no less than 0.125 seconds (2
-3
) for port 2:
tp5000> set ptp sync-limit ioc1-2 -3
Example 11
Common Attributes:
To set the PTP delay limit to no less than 0.250 seconds (2
-2
) for port 1:
tp5000> set ptp delay-limit ioc1-1 -2
Example 12
Common Attributes:
To provision PTP priority-1 for port 1 to a value of 160:
tp5000> set ptp priority-1 ioc1-1 160
Example 13
Common Attributes:
To provision PTP priority-2 for port 2 to a value of 192:
tp5000> set ptp priority-2 ioc1-2 192
Example 14
Common Attributes:
To set the PTP domain for port 1 to a value of 12:
tp5000> set ptp domain ioc1-1 12
Example 15
Common Attributes: