Symmetricom TimeProvider 5000 User Manual

234 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
y= 1|2, the port number on the active IOC module
Example 1:
To enable port redundancy on IOC1 module 
tp5000> set redundancy port ioc1 enable
Example 2:
To set Port 1 as the active port in the redundancy configuration 
tp5000> set redundancy active-port ioc-1
Level : Config and Admin only

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English