Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 235
Chapter 3
TimeProvider 5000 CLI Command Set
show ref
Use this command to display the system's reference mode and manual input
reference.
Command Syntax:
show ref
Example:
tp5000> show ref
Response:
Reference Info
-------------------------------------------------------------------------------
| Reference | Ref | Priority | PQL | PQL Config | PQL Input | Reference |
| | State | | State | Value | Value | Status |
|-----------|-------|----------|-------|------------|-----------|-------------|
| GNSS |enable | 1 |disable| 1 | 1 |disqualified |
|...........|.......|..........|.......|............|...........|.............|
| GPS |enable | 2 |disable| 1 | 1 |selected |
|...........|.......|..........|.......|............|...........|.............|
| PPS-TOD-1 |enable | 3 |disable| 1 | 1 |disqualified |
|...........|.......|..........|.......|............|...........|.............|
| PPS-TOD-2 |enable | 4 |disable| 1 | 1 |disqualified |
|...........|.......|..........|.......|............|...........|.............|
| Input-1 |enable | 7 |disable| 3 | 15 |disqualified |
|...........|.......|..........|.......|............|...........|.............|
| Input-2 |enable | 8 |disable| 3 | 15 |disqualified |
|...........|.......|..........|.......|............|...........|.............|
Reference Mode - time
Reference Criteria - priority
Level : User, Config, and Admin

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English