Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 251
Chapter 3
TimeProvider 5000 CLI Command Set
tp5000> set synce ql-state exp0 all enable
Example 4:
To set the SSM/QL directional mode to bidirectional for all ports on expansion shelf
1 (id=exp0):
tp5000> set synce output-ql-mode exp0 all bidirectional
Remarks: This command only applies to PTP/SyncE expansion shelves.
Level : Config and Admin only

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English