Symmetricom TimeProvider 5000 User Manual

252 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
set-timeout
This command sets the inactivity timeout to the defined time interval, in seconds.
This setting is only used for the current session.
Command Syntax:
set-timeout
Range: 0 to 86400 seconds
Default: 0 seconds
Example:
tp5000> set-timeout
Response:
(Prompt for value)
Timeout ( 0 - 86400 sec): 1800
1800 sec timeout set successfully
Level : User, Config, and Admin
show-timeout
This command displays the inactivity timeout to the defined time interval, in
seconds.
Command Syntax:
show-timeout
Example:
tp5000> show-timeout
Response:
The current session timeout - 900 sec
Level : User, Config, and Admin

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English