Symmetricom TimeProvider 5000 User Manual

302 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 4 Provisioning
Provisioning PTP
Figure 4-14. Set PTP Command Hierarchy  Unicast Dynamic
Figure 4-15. Set PTP Command Hierarchy  Unicast Static
Table 4-10. PTP
 Common Parameter Descriptions
Parameter Description
profile Use to control whether Grandmaster operates with Default
(Multicast), Hybrid (Multicast-hybrid), Telecom-2008
(Unicast), or ITU-G.8265-1 profile for the specified port.
mgmt-addr-mode Use to control whether PTP management messages should
use unicast or multicast. This setting is independent of the
addr-mode. For example, management can be set for
multicast while PTP synchronization is using unicast. For
multicast management, the client must be in the client list.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English