Symmetricom TimeProvider 5000 User Manual

426 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix A System Messages
System Notification Messages
47 IOC present
0 - 1 0=IOC1, 1=IOC2
48 IOC not present
0 - 1 0=IOC1, 1=IOC2
49 No IOC present
n/a n/a
50 Transitioned to active state
n/a n/a
51 Transitioned to standby state
n/a n/a
52 Input software loop not settled
0 - 7 0=GPS, 3=INPUT-1,
4=INPUT-2, 5=GNSS,
6=PPS_TOD-1,
7=PPS_TOD-2
53 Input PPS Loss
n/a n/a
54 User configuration lost
0 - 1 0=config1
1=config2
55 Primary image failed. Running
backup image
0 - 8 * index is internal code
56 Production configuration data
error
n/a n/a
57 Direct access image error. Use
JFFS2 image
0 - 1 0=fatal-bad-uImage1
1=fatal-bad-uImage2
58 IMC-IOC FPGA link failed
n/a n/a
59 Excessive traffic on Ethernet port
0 - 254?
60 Unsupported SFP on Ethernet
port
0 - 1 ETHy
y=1-16
61 Input poor SSM
0 - 4 0=GPS, 3=Input1, 4=Input2
62 Input SSM changed
0 - 4 0=GPS, 3=Input1, 4=Input2
63 Time input not tracking
n/a n/a
64 Internal reference data loss
n/a n/a
65 IO module present
n/a n/a
66 IO module not present
n/a n/a
67 Redundancy data transfer error
1 - 3 * index is internal code
68 PTP client critical alarm
0 - n index is client error code
Table A-2. Secondary Index Descriptions for System Notification Messages
Event
ID
Description
Secondary
Index
Secondary Index
Description

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English