Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 425
Appendix A System Messages
System Notification Messages
26 Entered fast-track mode
n/a n/a
27 Entered normal-track mode
n/a n/a
28 Entered bridging mode
n/a n/a
29 Entered holdover mode
n/a n/a
30 In holdover mode for extended
period
n/a n/a
31 Operational failure
0 - 9 * index is internal code
32 Input active
0 - 7 0=GPS, 3=INPUT-1,
4=INPUT-2, 5=GNSS,
6=PPS_TOD-1,
7=PPS_TOD-2
33 IOC-to-IOC sync fault
n/a n/a
34 Input disqualified as system
reference
0 - 4 0=GPS, 3=INPUT-1,
4=INPUT-2
35 Input loss of signal
3 - 7 3=INPUT-1, 4=INPUT-2,
6=PPS_TOD-1,
7=PPS_TOD-2
36 Input phase error
0 - 4 0=Time, 3=INPUT-1,
4=INPUT-2
37 Input IPLL not settled
3 - 4 3=INPUT-1, 4=INPUT-2
38 Input frequency error
3 - 4 3=INPUT-1, 4=INPUT-2
39 Input out of frame
3 - 4 3=INPUT-1, 4=INPUT-2
40 Input alarm indication signal
3 - 4 3=INPUT-1, 4=INPUT-2
41 PTP server near packet limit
0 - 1, 255 0=ETH1, 1=ETH2,
255=redundant-port-pair
42 PTP server near client limit
0 - 1, 255 0=ETH1, 1=ETH2,
255=redundant-port-pair
43 PTP client is unreachable
0 - 9 index is static client index
44 Hardware-software incompatible
n/a n/a
45 IMC-IOC Software incompatible
n/a n/a
46 IOC-IOC Software incompatible
0 - 1 * index is internal code
Table A-2. Secondary Index Descriptions for System Notification Messages
Event
ID
Description
Secondary
Index
Secondary Index
Description

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English