Check communication status 5 Implement application controller setup
l To avoid spraying an area that has previously been sprayed, tap Yes.
l To spray an area that has previously been sprayed, tap No.
Check communication status
To check that the CFX-750 display and your implement controller are communicating correctly,
access the VR Controller Status screen.
1.
At the Settings screen, tap .
2. At the Vehicle screen, tap Status.
3.
At the Status screen, tap VR Controller Status.
4. Check that the status displays as Connected.
5. If the status display shows as Not Connected, verify that the controller cable is securely
connected to the display. If the cable is secure, verify that the display and the controller are
configured correctly.
Version 7.0, Revision A CFX-750 Display User Guide 113
To Next Page
Loading...
