13 Operations Field-IQ operation
Setting Description
Refill method
l Refill: To fill the tank or bin to the top
l Partial Refill: To add a specified amount to the tank or bin when
you tap Partial Refill Now from the Refill screen.
Refill Now / Partial Refill
Now
Use this option to refill the tank or bin.
Section switching setup
Setting Description
Coverage switching overlap The amount of boom switching overlap allowed before the system
switches that section.
Enter a percentage between 1-99%.
For:
l Less skip: Set a high percentage when total coverage is
essential. The system will turn off sections when they cover a
larger percentage of any fully covered areas. This may cause
some double-coverage. Sections will turn on as soon as they
move from a covered to an uncovered area.
l Less overlap: Set a low percentage when you need to save
product. The system will turn off sections as soon as you reach
any covered area. This may leave some skips. Sections will turn
on when the entire section has moved from a covered to an
uncovered area.
Refill method
l Refill: To fill the tank or bin to the top
l Partial Refill: To add a specified amount to the tank or bin when
you tap Partial Refill Now from the Refill screen.
Refill Now / Partial Refill
Now
Use this option to refill the tank or bin.
Boundary switching overlap
Use this option to control the amount of overlap on a boundary before the system switches off the
boom section. Enter a percentage between 1-99%.
Note – This setting operates only when the boom is overlapping a headland, pivot boundary, or
exclusion zone.
232 CFX-750 Display User Guide Version 7.0, Revision A
To Next Page
Loading...