Display basics 3 Getting started
Power down
1.
To turn off the CFX-750 display, hold down the power button for three seconds. The Power
Down In Progress screen displays, showing a countdown to powering down.
2. To cancel the power down process, release the power button before the three-second
countdown is complete.
3. If you wait for the three-second countdown, the system powers off.
Quick start wizard
With the Quick Start Wizard, you can configure settings before you begin driving. The first time you
turn on the display, the wizard starts automatically. Make sure that when you first turn on the
display that you complete all steps of the wizard.
When you use the wizard, you can choose whether or not it starts every time the display is turned
on. If you choose to hide the wizard, the Guidance screen will display automatically when you turn
the unit on again.
To access the wizard at another time other than the first-time power on:
1.
Tap at the Guidance screen.
2.
At the Settings screen, tap .
3. Tap Quick Start Wizard. The Welcome screen displays.
4.
Tap . The Units screen displays.
5. To set up your system, complete each screen of the wizard.
USB socket
Use the USB socket to transfer data with a USB drive. See USB drive data transfer, 182.
The USB socket is on the rear of the display. See Display hardware, 36.
Reset the display
If you need to reset the display, you can perform a soft or hard reset.
Soft reset
A soft reset returns all settings to the factory defaults. All saved field data remains intact.
To perform a soft reset on the display, see Soft Reset at Advanced display settings, 192.
Version 7.0, Revision A CFX-750 Display User Guide 39
To Next Page
Loading...