DCM-300 modem setup 11 Data
Wireless transfer can occur:
l Automatically (see Office Sync setup, 180 for automatic settings)
l Manually (see Manual wireless transfer, 182)
To access the Data screen:
1.
At the Guidance screen, tap .
2.
At the Settings screen, tap .
DCM-300 modem setup
A DCM-300 modem is required to:
l Use VRS™ corrections. (See Correction services setup, 168.)
l Send data wirelessly from the CFX-750 display to the office using Office Sync.
Passcodes
To use VRS corrections and Office Sync, the DCM-300 modem requires a passcode upgrade.
Unlock DCM-300 modem
To begin using VRS corrections or transferring data, VRS and Sync File Transfer functions in the
DCM-300 modem must be unlocked.
To unlock the modem with a passcode, first obtain the unlock code from your Trimble reseller.
1. Turn on the modem.
2. Connect the modem to the USB port on the CFX-750 display.
3.
At the Guidance screen, tap .
4.
At the Settings screen, tap .
5. At the System screen, tap Unlock/Upgrade.
6. At the Unlock/Upgrade screen, tap Unlock DCM-300.
7.
At the Enter Lockcode screen, enter the passcode. Tap .
8. When the display asks if you want to restart the modem, tap Yes.
Version 7.0, Revision A CFX-750 Display User Guide 179
To Next Page
Loading...
