Curve smoothing settings 8 Mapping guidance setup
Curve smoothing settings
By default, the settings for CFX-750 display smooths curves for improved guidance and auto
steering.
However, you can disable curve smoothing on tight turns (curves that have a radius of less than 3m
(10 ft.).
Note – If you disable curve smoothing, the CFX-750 display or the Autopilot system may not be
able to auto steer around the tighter turns. Be careful when you disable curve smoothing.
To disable curve smoothing:
1.
At the Guidance screen, tap
2.
At the Settings screen, tap .
3. Tap Turn Settings.
4. Tap Minimum Turn Radius Mode and then tap your choice: automatic, disabled or manual.
Version 7.0, Revision A CFX-750 Display User Guide 153
To Next Page
Loading...
