Safety Information
Always follow the instructions that accompany a Warning or Caution. The information it provides is
intended to minimize the risk of personal injury and/or damage to property. In particular, observe
safety instructions that are presented in the following format:
WARNING – This alert warns of a potential hazard which, if not avoided, could result in severe injury or even
death.
CAUTION – This alert warns of a potential hazard or unsafe practice which, if not avoided, could result in injury or
property damage or irretrievable data loss.
Note – An absence of specific alerts does not mean that there are no safety risks involved.
Warnings
Auto guidance
WARNING – Obstacles in the field can cause collisions, which may injure you and damage your vehicle. If an
obstacle in the field makes it unsafe to continue a particular phase of the automated dead-zone calibration, stop
the vehicle to abort the phase and turn the steering wheel to disengage the system. Reposition the vehicle and
continue from the current test phase.
WARNING – Auto guidance systems cannot avoid items in the field such as obstacles. Make sure you are
adequately trained to operate the auto guidance system.
WARNING – Many large and sudden changes in satellite geometry caused by blocked satellites can cause
significant position shifts. If operating under these conditions, auto-guidance systems can react abruptly. To avoid
possible injury or damage to property under these conditions, disable the auto-guidance system and take manual
control of the vehicle until the conditions have cleared.
Calibration
WARNING – Incorrect adjustment of the Manual Override Sensitivity calibration could cause this critical safety
feature to fail, resulting in personal injury or damage to the vehicle. Do not choose a setting that is either too
sensitive or not sensitive enough. It is vital to avoid setting the sensitivity so low that the system will not detect
any steering wheel motion.
Version 7.0, Revision A CFX-750 Display User Guide 17
Safety Information
To Next Page
Loading...
