4 Vehicle guidance setup Autopilot steering system
Autopilot steering system
The Autopilot auto steering system enables you to automatically steer your vehicle on a guidance
line or pattern you create using the CFX-750 display.
l Autopilot setup and calibration (See Autopilot system setup, 68)
l Advanced settings (See Advanced settings for the Autopilot system, 81)
l Status and diagnostics (See Status/Diagnostics for the Autopilot system, 82)
l Saving or restoring a vehicle configuration file (See Save or restore vehicle configuration file, 84)
l Autopilot operation (See Autopilot system operation, 223)
Autopilot system setup
1.
At the Guidance screen, tap .
2.
At the Settings screen, tap .
3. At the Vehicle screen, tap Auto Steer
4. At the Auto Steer Setup screen, tap Autopilot.
5. Tap Autopilot Setup.
6.
At the Autopilot Setup screen, complete the settings as appropriate.
Note – The buttons displayed depend on the configuration of the vehicle loaded from the
vehicle database (VDB) or from a restored vehicle configuration.
Setting Explanation
Load VDB Access the Trimble Vehicle Database for basic setup by loading it
from a USB drive.
See Load VDB, 70.
Manual Override Adjusts how much force is required to disengage the system
when the driver turns the steering wheel for pressure
transducer and some quadrature encoder systems. Depending
on the manual override method, this option may not be
available.
See Manual Override, 70.
Controller Orientation Determines the position/orientation of the controller as it is
currently installed in the vehicle.
See Controller Orientation, 71.
68 CFX-750 Display User Guide Version 7.0, Revision A
To Next Page
Loading...
