Autopilot steering system 4 Vehicle guidance setup
Performance Settings
Note – Currently the Performance Setting calibration is only available for supported sprayers and
swathers.
1.
Select the correct performance setting for your sprayer based on the following required
responsiveness.
Performance Settings Explanation
High Accuracy Creates high accuracy in all conditions. This mode is best for
high-accuracy operations at slower speeds, on hard surfaces,
tight curves, and side hills.
High Stability Creates smooth and stable corrections. This mode is best for
soft soils, ridges, deep furrows, and high speed operations.
2.
Tap .
Advanced settings for the Autopilot system
To view and set the advanced configuration settings of the Autopilot system:
1.
At the Guidance screen, tap .
2.
At the Settings screen, tap .
3.
Tap Auto Steer Setup and then tap Advanced Settings.
Setting Explanation
NMEA Output
Establishes broadcast output protocols for GNSS positioning.
TAP Parameter Wizard
Allows manual entry of specific TAPs and the entry of their
required value.
Autopilot Operation
Establishes operational parameters involving guidance
aggressiveness, operator warnings, and a selection of steering
sensor types.
Version 7.0, Revision A CFX-750 Display User Guide 81
To Next Page
Loading...