EasyManua.ls Logo

Trimble CFX-750 - EZ-Pilot Steering System Setup

Default Icon
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Vehicle guidance setup EZ-Pilot steering system
EZ-Pilot steering system
The EZ-Pilot auto steering system enables you to automatically steer your vehicle on a guidance line
or pattern you create using the CFX-750 display.
l Setup (see EZ-Pilot system setup, 62)
l Calibration (see EZ-Steer system calibration, 59)
l Operation (see EZ-Pilot system operation, 221)
EZ-Pilot system setup
To view and adjust the settings for the EZ-Pilot system:
1.
At the Guidance screen, tap .
2.
At the Settings screen, tap .
3.
Tap Auto Steer and then EZ-Pilot Setup.
Note If the EZ-Pilot Setup button does not display, tap Auto Steer System Type and then tap
EZ-Pilot for your controller.
4. Complete the settings for setting up the EZ-Pilot system.
5. After settings are complete, calibrate the EZ-Pilot system (see EZ-Pilot system calibration, 64).
EZ-Pilot setup is divided into these sections:
l Engage Options
l Vehicle Setup
l Aggressiveness
l Advanced
l EZ-Pilot demo mode
Engage Options
Setting Explanation
Minimum/Maximum
speed
Enter the minimum and maximum speeds at which the EZ-Pilot
system will disengage:
l Minimum: between 1.0 and 15.9 mph (1.6 and 25.5 kph)
l Maximum: between 1.0 and 18.0 mph (1.6 and 28.8 kph)
62 CFX-750 Display User Guide Version 7.0, Revision A

Table of Contents

Other manuals for Trimble CFX-750

Related product manuals