Trimble CFX-750 - Office Sync setup; Initial setup

11 Data Office Sync setup
9.
The Unlock DCM300 screen displays. Tap . The DCM-300 modem will be ready to use after
about three minutes.
10. To check the status of the modem unlock:
a.
At the Guidance screen, tap .
b.
At the Settings screen, tap .
c. At the System screen, tap Status.
d.
At the Status screen, tap Upgrade Options.
DCM-300 Upgrade Option Explanation
Firmware Version Current version of firmware
Cellular Parameter Modification
Needed for DCM-300G modem when the
customer supplies their own SIM card
Ag Vehicle Bus
Future functionality
File Transfer, VRS, Internet, and WiFi
Required for the use of VRS or Connected Farm
Sync functions
Office Sync setup
With the Office Sync feature, the CFX-750 display can wirelessly send field information from the
display to your home or office computer. This can occur either automatically or when you manually
choose to start the transfer.
Note – Obtain the passcode for OfficeSync from your Trimble reseller and unlock the feature prior
to setup.
Initial setup
The Initial Setup wizard steps you through the process of setting up your wireless modem and
registering the network.
By default, the Office Sync feature is set to Off. To turn the feature on:
1.
At the System screen, tap .
2.
At the Settings screen, tap .
3. At the Data screen, tap Office Sync Setup.
4. At the Office Sync Setup screen, tap Office Sync.
180 CFX-750 Display User Guide Version 7.0, Revision A