5 Implement application controller setup Raven controller setup
Advanced
Use the Advanced option in the Implement screen to configure:
l Boom Setup
l Target Rate
l Rate Snapping
Boom Setup
Setting Explanation
Implement width Enter a width between 1' 00" - 328' 01" (0.30 - 99.99 m).
Number of sections Enter a number between 1 - 10.
Target Rate
Set the target application rate that will be sent to the Raven controller. Enter a rate between 0.0 -
11000.0.
Rate Snapping
Due to pump constraints, liquid flow is generally inconsistent. To control how these inconsistencies
display on the screen, turn rate snapping on or off.
Setting Explanation
On Matches the applied rate to the target rate when within 10% of the
value.
Off Shows all fluctuations in the actual applied rate.
98 CFX-750 Display User Guide Version 7.0, Revision A
To Next Page
Loading...
