6 Field-IQ crop input control setup Control setup for a location
3. At the Unassigned screen, tap Edit and complete the settings as they apply.
a. Material Setup
b. Material Control
c. Section Control Setup
d. Rate Control Setup
e. Row Monitoring Setup
f. Sensor Setup
4.
At the Edit screen, select each option in sequence and complete all options and settings.
If you tap , the next sequence of screens display or the Edit screen displays where you can
select the next option. Additional options display as you complete each one.
Material assignment
At the Material Setup screen, you can switch the materials into a control location. The location
button shows the name of the location and the material that is currently assigned.
l Location name:Enter a name for the location
l
Material Assignment
Setting Explanation
No Material This is the default of a location and means that the location is
disabled.
Named materials (for
example, Corn, Soy)
Select a material to assign to the location. To change the
material, tap the location button (in this example Hoppers) and
select a new material. To disable the location, tap No Material.
If the material you require is not listed, exit from this screen and
then set it up using the Material Setup procedures. See Material
assignment, 128.
Material control
At the Material Control screen, choose how the application of the material will be controlled.
Setting Explanation
Switch Boxes The location is linked to both the master switch box and the
12-section switch box.
128 CFX-750 Display User Guide Version 7.0, Revision A
To Next Page
Loading...
