Display settings 12 System settings
Alert Beeper
The CFX-750 display will sound an alert in certain situations. You can set the system to use:
l Internal speaker loud: Speaker of the CFX-750 display at a loud setting
l Internal speaker quiet: Speaker of the CFX-750 display at a quiet setting
l External speaker (sonalert): External speaker such as Sonalert
Touchscreen beeper volume
When you tap buttons on the touchscreen, the CFX-750 display beeper can be:
l Loud
l Quiet
l Off (silent)
Lightbar Setup
Setting Description
Look Ahead
Allow time for large vehicles to correct offline error:
l For large vehicles that take longer to turn, increase the
look ahead time.
l For 4WD articulated tractors, always set the look ahead
time to 0 seconds.
Look ahead time applies to LED guidance only and does not
affect EZ-Steer performance.
Set the look ahead time in seconds.
LED Spacing
Note – LED spacing is the
distance represented by one
LED.
Adjust the sensitivity of the LEDs. To:
l Increase sensitivity, decrease the LED spacing
l Decrease sensitivity, increase the LED spacing
LED Brightness
Adjust the LED brightness for maximum visibility. Maximum =
100, minimum = 0 (off).
Version 7.0, Revision A CFX-750 Display User Guide 191
To Next Page
Loading...
