Trimble CFX-750 - System Settings

12 System settings System settings
System settings
The System menu enables you access system settings, including:
l Quick start wizard, 188
l Display settings, 189
l Advanced display settings, 192
l EZ-Remote Joystick custom settings, 86
l Unlock / Upgrade, 195
l Status, 196
l Restore defaults, 198
l Recalibrate touchscreen, 198
To access the System screen:
1.
At the Guidance screen, tap .
2.
At the Settings screen, tap .
Quick start wizard
With the Quick Start Wizard, you can configure settings before you begin driving. The first time you
turn on the display, the wizard starts automatically. Make sure that when you first turn on the
display that you complete all steps of the wizard.
When you use the wizard, you can choose whether or not it starts every time the display is turned
on. If you choose to hide the wizard, the Guidance screen will display automatically when you turn
the unit on again.
To access the wizard at a later time:
1.
At the Guidance screen, tap .
2.
At the Settings screen, tap .
3. Tap Quick Start Wizard. The Welcome screen displays.
4.
Tap . The Units screen displays.
5. To set up your system, complete each screen of the wizard.
188 CFX-750 Display User Guide Version 7.0, Revision A