R3765/67G Series Network Analyzer Operation Manual
7.4 RESPONSE Block
7-11
{S22(PORT2)} : Sets the measurement parameter to S22.
{S33(PORT3)} : Sets the measurement parameter to S33.
{S44(PORT4)} : Sets the measurement parameter to S44.
{S21(P2 ← P1)} : Sets the measurement parameter to S21.
{S12(P2 → P1)} : Sets the measurement parameter to S12.
{S31(P1 → P3)} : Sets the measurement parameter to S31.
{S13(P1 ← P3)} : Sets the measurement parameter to S13.
{S32(P2 → P3)} : Sets the measurement parameter to S32.
{S23(P2 ← P3)} : Sets the measurement parameter to S23.
{S41(P1 → P4)} : Sets the measurement parameter to S41 (For OPT14).
{S14(P1 ← P4)} : Sets the measurement parameter to S14 (For OPT14).
{S42(P2 → P4)} : Sets the measurement parameter to S42 (For OPT14).
{S24(P2 ← P4)} : Sets the measurement parameter to S24 (For OPT14).
{S43(P3 → P4)} : Sets the measurement parameter to S43 (For OPT14).
{S34(P3 ← P4)} : Sets the measurement parameter to S34 (For OPT14).
{TEST - PORT CONNECTION (P1 - P2)}:
Indicates that the current measurement is performed
between TEST PORT1 and TEST PORT2. When this
menu is selected, the measurement ports are switched to
TEST PORT1 and TEST PORT2.
{TEST - PORT CONNECTION (P1 - P3)}:
Indicates that the current measurement is performed
between TEST PORT1 and TEST PORT3. When this
menu is selected, the measurement ports are switched to
TEST PORT1 and TEST PORT3.
{TEST - PORT CONNECTION (P2 - P3)}:
Indicates that the current measurement is performed
between TEST PORT2 and TEST PORT3. When this
menu is selected, the measurement ports are switched to
TEST PORT2 and TEST PORT3.
{TEST - PORT CONNECTION (P1 - P4)}:
Indicates that the current measurement is performed
between TEST PORT1 and TEST PORT4. When this
menu is selected, the measurement ports are switched to
TEST PORT1 and TEST PORT4 (For OPT14).
{TEST - PORT CONNECTION (P2 - P4)}:
Indicates that the current measurement is performed
between TEST PORT2 and TEST PORT4. When this
menu is selected, the measurement ports are switched to
TEST PORT2 and TEST PORT4 (For OPT14).
To Next Page
Loading...
