R3765/67G Series Network Analyzer Operation Manual
7.4 RESPONSE Block
7-12
{TEST - PORT CONNECTION (P3 - P4)}:
Indicates that the current measurement is performed
between TEST PORT3 and TEST PORT4. When this
menu is selected, the measurement ports are switched to
TEST PORT3 and TEST PORT4 (For OPT14).
{TWIN MEAS} : Opens the menu to select the twin parameter, which
performs two measurements simultaneously.
{S11 & S21 (P2 ← P1)}:
Sets the twin measurement parameter to S11 and S21.
{S22 & S12 (P2 → P1)}:
Sets the twin measurement parameter to S22 and S12.
{S11 & S31 (P1 → P3)}:
Sets the twin measurement parameter to S11 and S31.
{S33 & S13 (P1 ← P3)}:
Sets the twin measurement parameter to S33 and S13.
{S22 & S32 (P2 → P3)}:
Sets the twin measurement parameter to S22 and S32.
{S33 & S23 (P2 ← P3)}:
Sets the twin measurement parameter to S33 and S23.
{S11 & S41 (P1 → P4)}:
Sets the twin measurement parameter to S11 and S41
(For OPT14).
{S44 & S14 (P1 ← P4)}:
Sets the twin measurement parameter to S44 and S14
(For OPT14).
{S22 & S42 (P2 →P4)}:
Sets the twin measurement parameter to S22 and S42
(For OPT14).
{S44 & S24 (P2 ← P4)}:
Sets the twin measurement parameter to S44 and S24
(For OPT14).
{S33 & S43 (P3 → P4)}:
Sets the twin measurement parameter to S33 and S43
(For OPT14).
{S44 & S34 (P3 ← P4)}:
Sets the twin measurement parameter to S44 and S34.
(For OPT14)
To Next Page
Loading...
