ADVANTEST R3765G Series

R3765/67G Series Network Analyzer Operation Manual
7.5 Calibration
7-49
{MARKER→EXTENSION}: Sets the measured value by the active marker as a
port extension value in the reflection wave
measurement.
• For R3765CG/67CG, OPT14
{EXTENSION PORT 1} : Sets the value of the S parameter test-set port 1
extension by time.
{EXTENSION PORT 2} : Sets the value of the S parameter test-set port 2
extension by time.
{EXTENSION PORT 3} : Sets the value of the S parameter test-set port 3
extension by time.
{EXTENSION PORT 4} : Sets the value of the S parameter test-set port 4
extension by time.
{MARKER→EXTENSION}: Sets the measured value by the active marker as a
port extension value in the reflection wave
measurement.
• For R3765AG/67AG
{EXTENSION ON/OFF} : Selects ON/OFF of the port extension.
{EXTENSION INPUT A} : Sets the value of the input port A extension by time.
{EXTENSION INPUT B} : Sets the value of the B input port B extension by time.