Creating database points
ADM003GVAE1005 93
Creating database points
The following section defines the procedure necessary to create any type of
database point. This procedure is common to all point types, for specific
information about input & output points, triggered, or tank points refer to the
following sections.
Step-by-Step
• From the FuelsManager Configuration application Database menu select
the Points command, the Database Edit dialog box appears
• In the Database Edit dialog box, click New to create a new point, the Add
Point to Database dialog box appears
• Enter the level(s) names used to define the new point. Depending on which
level you selected, the higher levels appear in the dialog box. Each point
must be unique within the system.
• Under Point Type, select either Tank, Input, Output, or Triggered
• Click Add
• The Database Edit dialog box appears if you selected a Tank point, follow
the appropriate procedure to create a Tank point. For a description of the
Add Point to Database and Database Edit dialog box refer to the tables on
the following pages
• The Edit Point dialog box appears if you selected an Input or Output point.
Follow the appropriate procedure to create an Input and Output point
• The Edit point dialog box appears if you selected a Triggered Point. Follow
the appropriate procedure to create Triggered point
To Next Page
Loading...