ATD2 10511 - Defining Movement Paths; Before You Start; Accessing the Movement Configuration

Defining Movement Paths
ADM003GVAE1005 229
Defining Movement Paths
In FuelsManager, setting up movement paths involves the following procedures:
1. Defining Nodes
2. Defining Sources and Destinations
3. Defining Groups (Optional)
Each procedure is described in order in this section.
Before you start
Before you start configuring Movements, make sure that the database is not in
SHUTDOWN mode. Otherwise, the user is not able to access the configuration
dialogs.
The database mode can be altered from the System Menu of the Configuration
program. Select System and click Startup Options. The dialog containing the
startup modes is displayed.
Accessing the movement configuration
Movements dialog
Step by Step
• Open the FuelsManager configuration program
• Select Movement from the menu bar